Cormatex designs and manufactures both longitudinal and transversal cutting systems for any type of non woven fabric, developing different technological solutions depending on the characteristics of the finished product to be cut.
Cormatex guarantees technology and performance of the highest level, in line with the extreme performances now achieved by modern production lines.
Strenghts
- Working height: from 1000 to 4000 mm (variants available on request);
- Productivity up to 500 kg / h per meter of width;
- Grammage: from 100 to over 10.000 g / m2, depending on the material processed);
- Finished product thickness up to 300 mm (variants available on request);
- Max density variation: ± 5%;
Process flow
The material is fed to the longitudinal cutting group (02) and guided by a pair of caladering rollers (01), with automatically adjustable pressure. The longitudinal cutting group can be equipped with different types of blades, pressure type, running type as well as scissor type depending on the product features. Multiple longitudinal blades can be assembled on request and their position can be manually adjusted or automatically adjusted from the control panel on request. Another pair of calandering rollers (03) guides material towards the cross cutter (04) by keeping a perfect alignment. The transversal cutting group can be equipped with different type of blades such as guillotine type, pressure type, running type or scissor type. The transversal cutting group can be also assembled on a movable trolley (05) in order to perform a perfectly straight cut without stopping the line. Each blade is equipped with a sharpening stone that can automatically sharpen the blade with a timing to be set on the control panel.
01. Calendering rollers
02. Cutting group
03. Calendering rollers
04. Cross cutting group
05. Movable cutting trolley
