The cashmere dehairing line has been designed for a complete separation of the thin and finest fibres (14-15 micron) from the coarse hair of the outer coat, which cannot be used in the following carding and spinning processes.
Therefore, this technology is designed both for dehaired cashmere fibres sellers and cashmere yarns and fabrics/sweaters producers.
Advantages
- Perfect elimination of coarse hair;
- Percentage of residual coarse hair after treatment is not higher than 0.1-0.2%, as per international quality standards;
- High yield – up to 98% of the fine fibre content;
- No damage to or shortening of fibres;
- Considerable raw material purchasing cost cutting for cashmere products manufacturers.;
- Complete scurf and any other impurities elimination from fibres.
Process flow
The fiber is fed into the opening section (02) with a feeding belt (01). The dehairing section (03) consists of a series of special cylinders that transport the fibers to the final combing machine without shortening or damaging them. Coarse fiber is discarded onto the lower belt and collected pneumatically in filtering bags. The waste collection system (04) is divided into separate sections so that part of the waste can be reprocessed if it contains fine fiber suitable to be processed again.
Other informations
- Working width up to 2000 mm (other working widths available on demand);
- Production up to 50 kg/h depending on the type of fiber and the content of impurities present;
- Perfect elimination of coarse fibers;
- Residual percentage of coarse fibers after treatment not exceeding 0.1-0.2% in accordance with international quality standards. High yield of up to 98% of fine fiber content;
- No damaging or shortening of fibers;
- Complete elimination of dandruff and any other impurities present in the fiber.
